DACC CarbonManufacturing Technology
Testing and Certifications
- HOME
- Manufacturing Technology
- Testing and Certifications
CT, Computed Tomography
X-ray computed tomography (X-ray CT) accurately examines various faults that are difficult to spot with regular X-ray photographs as it takes an X-ray tomography of a specific area of a laminated plate of the composite to display all aspects of the cross-section.
RT, Radiographic Test
Scanning the laminated plates of composite with X-rays or γ-rays results in changes in the strength of transmitted x-rays depending on the shape of the laminated plate.
Injection of X-rays or γ-rays scanning to composite laminated plates. These changes in the intensity of X-ray are called X-rays' photosensitive reaction, fluorescence mechanism, and ionization reaction. It is possible to detect the defects and explore internal structures with this.
| Item | Unit | Specification |
| Maximum voltage of X-ray tube | kV | 225kV, 8mA |
| Max diameter of CT image field | mm | 275 |
| Vertical limits of scan axis | mm | 880 |
CMM, Three Dimension Coordinate Measuring Machine
It is possible to check the 3-dimensional measurements, geometry deviations, and shape precisions and enables an easy measuring of complex shapes and the free curves of products.
| Item | Unit | Specification |
| Measuring range | mm | X 700 x Y 700 x Z 600 |
| Length measurement error | μm | 1.8+L/300 |
| Scanning speed(Travel speed) | mm/sec | 125(70) |
